The basic technology of men and women's shirts in garment making.

Here is the basic and simplest of the basic techniques of shirting, which means the most simple introduction to deep learning. The shirts we see on the market today are very versatile, but the basic ones are essential. This is why we pay attention to the basic process of learning, from the basic process explanation share to everybody's reason. Let's take a look at one of the men's basic shirts.

1. From the above picture, we can see the following basic information:

A, the front sheet contains the front door, and it is left to right, opposite to women's wear;

B, breast pocket, and left breast pocket;

C. Normal shoulder seam, normal armhole.

D, sleeve for a piece of sleeves, and sleeve cuff and arrow, and cuffs have a fold;

E, the collar is the normal turnover collar;

F, yuk in the back;

There are two folds in the back.

We've got a couple of things up here that have determined how most of our craft should be done. Now, let me give you an idea.

We regardless of the leisure style is what style, we should all be pregnant with a concept, is we the clothes do it, whether beautiful or not, whether you are willing to buy, on your own, whether designers or version of the division, all need to think about this question.

From the information of A, in combination with our length, we can decide whether we should adopt the front edge or the general front door according to the style and needs. Do we need to break the seam? , how much the number of buttons, the size of the empty words, what kind of wiring to look better, here, we need to carefully consider, in addition placket generally stick lining, we need to think about whether this kind of fabric will, for our clothes have aesthetic effect, we need to choose. It's not a complete picture. In fact, as a key element of shirt-door, it is the place where designers use their own design ideas. Different fabrics, colors and patterns can be applied to different effects.

From the information in the B, look be like simple a breast pocket, but it is precisely in our whole style, an important design elements, in the same way, all is the place where designer version t play. The position of the pocket, the size of the pocket, the line of the pocket, whether it is refracted or the light stick, has a great influence on the effect of our whole clothes.

From C information, clearly explains, we this sleeve is normal, or leisure, also means that we are in the process of plate making, the choice of the armhole depth made a limitation, we must be within this range, the more the knowledge, plate making and design you are interested can go to hangzhou as the research and development center, friends in this here can get what you want to help.

2. Production process.

Discharge - cutting - do the collar - made double flap. The flap - hot bags - bags - joining together shoulder sleeve - collar attached - do - cut sleeve - suture side seam sleeve - cut sleeve from Ellen - volume made bottom - keyhole - studs - ironing

steps

The main points of

Material: according to the size of the paper, the size of the material. Iron the cloth, pay attention to the cloth line, and to the bar.

Cut: check the size, whether the pattern is correct. Then use a pin to fix the fabric, fabric and paper. When cutting, pay attention to the front and back of the paper, so as not to cut out the garment pieces. The two pieces of fabric are folded in front, and draw lines along the edges of the paper.

Do collar: the front side of the lapel, the car seam 1cm, and the outside turn to the 0.5cm open line. 1. The collar will be pressed with a piece of collar that will be lined with 1cm for 1cm and 0.5cm for the side of the collar, and then the 2 pieces of the collar will be clamped in the front of the lapel to sew 1cm and 1cm outside.

The front side of the front side of the front and the front of the front of the front side of the front side of the front side of the front side of the front side of the front side of the car. To fold the inner edge of the inner button to the inside.

Ironing bag: the breast pocket is held twice in a bag, 2.5cm in width and 0.1cm in the side of the bag.

Nailbag: pinned to the left side of the garment, the side of the bag edge is 0.1cm. The sealing triangle is 0.6cm wide, and the bag is symmetrical with the large body to the bar.

Pieces: after joining together over your shoulders: (1), align all over pieces before and after the front of the shoulder after big body, sewing 1 cm, impreaaion nip outside over your shoulders, made 0.1 cm open wire, then before the garment body at the shoulder seam 1 cm, seam after back, shoulder fold hot outside 1 cm, made open wire 0.1 cm. 2. Front piece: 1cm in the sewing machine, 1cm backward, and 0.1cm bright line.

Collar: align the other side of the collar with the body of the garment and sew 1cm. Turn over the inside of the collar for a week.

Sleeves: 1.1cm for the sleeve (sword head). 2. The front side of the sleeve is 1cm in front of the car, and 0.5cm is folded.

Sleeve: the garment is open and sutured, and the sleeves are sewn together with the sleeves. The bending part should be lengthened and the seam is 1cm.

Sew the sleeve seam low: 1cm in front relative to the car, and the seam backward to the back.

Sleeve cuff: the cuff is lined with the sleeve for 1cm, and the seam will be folded into the sleeve cuff for 0.1cm.